Inovonics Antenna Configuration

Peripherals Screen

Choose a Port

How to Install an Inovonics Antenna

At the touchscreen (or for a CoMo box - at the GCTV image):

• When you first use the Inovonics antenna, open the case for it, and attach the ACC643 cable
• Plug the antenna into an electrical outlet that is not switch-operated
• The Invonics antenna is a serial device, so plug it into a serial port on the system if there is one, or use a Serial-USB adapter to plug the antenna into an available USB port
• Press the System (Gear) button
• Enter the 4-digit System PIN (which is set, and can be viewed, on the Advanced Settings screen in the Care Menu)
• Press "Peripherals"
• On the Peripheral page, the Inovonics antenna is referred to as the "EN4000"
• In the EN4000 row, choose the port - your choices will be specific to the system hardware
• Press "Turn On"
• Restart peripherals when prompted
• If installed correctly, the row will now be highlighted in green. If there is a problem with the installation, the row will be highlighted in red.
• After it is installed correctly, you can begin to add Inovonics devices, such as motion sensors, door sensors, etc.