Difference between revisions of "Z-Stick Configuration"
Jump to navigation
Jump to search
| Line 9: | Line 9: | ||
* Press the System (Gear) button | * Press the System (Gear) button | ||
* Press "Peripherals" | * Press "Peripherals" | ||
* Choose the antenna type | * Choose the antenna type (Aeon Labs Z-Stick) | ||
* Choose the port - your choices will be specific to the system hardware | * Choose the port - your choices will be specific to the system hardware | ||
* Press "Turn On" | * Press "Turn On" | ||
* Restart peripherals when prompted | * Restart peripherals when prompted | ||
* If installed correctly, the row will now be highlighted in green. If there is a problem with the installation, the row will be highlighted in red.<br /><br /> | * If installed correctly, the row will now be highlighted in green. If there is a problem with the installation, the row will be highlighted in red.<br /><br /> | ||
Revision as of 18:32, 1 August 2012
Z-Stick
Peripherals Screen
Choose a Port
Overview
When you are using Z-Wave protocol ADL sensors, you have your choice of two Z-Wave transceivers (antennas), the Z-Stick or the Z-Troller. The Z-Stick is more commonly used, because of its small form factor. It is also easy to use, and less expensive than the Z-Troller. The Z-Stick has a shorter range than the Z-Troller, and is appropriate for demo systems, apartments, and smaller houses.
How to Install a Z-Stick
At the touchscreen (or for a CoMo box - at the GCTV image):
- Press the System (Gear) button
- Press "Peripherals"
- Choose the antenna type (Aeon Labs Z-Stick)
- Choose the port - your choices will be specific to the system hardware
- Press "Turn On"
- Restart peripherals when prompted
- If installed correctly, the row will now be highlighted in green. If there is a problem with the installation, the row will be highlighted in red.