Difference between revisions of "Inovonics Antenna Configuration"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
[[File:PeripheralsButton.png|left|Peripherals Button]] | |||
[[File:PeripheralsScreenForZ-Stick.png|right|frame|Peripherals Screen]] | [[File:PeripheralsScreenForZ-Stick.png|right|frame|Peripherals Screen]] | ||
[[File:EN4000Ports.png|right|frame|Choose a Port]] | [[File:EN4000Ports.png|right|frame|Choose a Port]] | ||
Revision as of 18:06, 3 August 2012
Peripherals Screen
Choose a Port
How to Install an Inovonics Antenna
At the touchscreen (or for a CoMo box - at the GCTV image):
- Insert the X10 antenna into an available port (typically a port on the back of the machine)
- If using the serial model, plug the antenna into an electrical outlet
- Press the System (Gear) button
- Enter the 4-digit System PIN (which is set, and can be viewed, on the Advanced Settings screen in the Care Menu)
- Press "Peripherals"
- On the Peripheral page, the Inovonics antenna is referred to as the "EN4000"
- In the EN4000 row, choose the port - your choices will be specific to the system hardware
- Press "Turn On"
- Restart peripherals when prompted
- If installed correctly, the row will now be highlighted in green. If there is a problem with the installation, the row will be highlighted in red.
- After it is installed correctly, you can begin to add Inovonics devices, such as motion sensors, door sensors, etc.