Bed and Chair Sensors

Bed or Chair Pressure Mat

Overview

Bed sensors can help you see whether your loved one is going to bed at normal times and staying in bed during the night. Activity graphs help you see whether your loved one is sleeping calmly or restlessly. And you can also see whether your loved one is staying in bed excessively, or returning to bed during the day. You can use these sensors on other furniture as well, such as chairs or couches.

Bed Activity Graph

Types of Bed Sensors

Each bed sensor has two parts, a pressure mat and a contact sensor. The pressure mats come in two sizes, and there are two different models of contact sensors. Your GrandCare representative or installer should help you choose the models that are right for your needs. If those needs change, different models or devices can be added to the system at a later date. As part of the installation process, the bed sensors must be paired with your system, so that the signals are picked up properly.

How to Place a Bed Sensor

For accurate readings, the pressure mat shouldn't be placed under the mattress. Instead, place it under mattress pad or blanket. It should be placed under the legs or feet of your loved one, somewhere where there is likely to be contact when your loved one is in bed. The sensor is attached by wires. You may want to attach the sensor to the bed frame, being careful to place it where the wires won't tangle with your loved one's feet.

If you are using the sensor on a chair or couch, the pressure mat shouldn't be placed under a cushion. Instead, place the mat on top of the cushions, but cover it with a blanket or quilt for your loved one's comfort. The sensor can be tucked out of the way between the cushions.

Checking the Bed Activity Graphs

• Log in to GCManage
• Open the Care Menu
• Click the "Activity" button - this displays a list of the motion sensors
• Click the "Show Bed Graph" icon for the bed or chair sensor you want to check

Each vertical bar on the graph represents a 15-minute period. The higher the bar, the more activity detected in that 15-minute time slot. Note that there is a short bar, even when there is nobody in bed during that time period. If there is no bar at all for a time period that has passed, that is an indication that there is a problem with the sensor. In most cases, it means that the batteries need to be replaced on the sensor, something that is easily checked on the Battery Report. For more serious issues, you can call your GrandCare installer, or GrandCare customer support.

Define a Bed Rule Condition

Define a Bed Rule Action

Setting Rules

You can set up rules to alert caregivers when something occurs. To add a rule:

• Log in to GCManage
• Open the Care Menu
• Click the "Activity" button
• In the Bed Rules section, click the "Add New Rule" button
  
  

There are two parts to each rule, a condition and an action. On the first screen, choose the condition. Your rule can be triggered:

• Whenever a button is pushed
• If a button is pushed during a specified time period
• If a button is not pushed during a specified time period
  
  

Once you have defined the condition, you need to set the action. Possible actions include turning on a light, or contacting a single caregiver, all caregivers, or a Call List. The types of contact include:

• Email
• Text message
• Phone call to home, work or cell phone
• Phone call to a Call List
  
  

Examples of rules might be:

• If the button is not pushed between 9 and 10am (when a nurse is expected to visit) then email an adult daughter.
• If the button is pushed at any time then send texts to all caregivers.
• If the button is pushed in the middle of the night, then contact a Call List.
  
  

Multiple rules can be triggered for any event, so that multiple types of alerts can be sent out, for example both phone calls and emails.

A checkbox next to the rule lets you set whether the rule is enabled or disabled. It might make sense to turn off a rule while your loved one is on vacation, so that alerts won't be sent out during that time. You can disable a rule by unchecking the box. When you're ready for the rule to be active again, just check the Enabled checkbox again, and then save the rule settings.