Difference between revisions of "Add Inovonics Devices"

From GrandCare Systems
Jump to navigation Jump to search
Line 21: Line 21:
* [[Bed and Chair Sensors|How to use Bed and Chair Sensors, add rules, view readings, etc.]]
* [[Bed and Chair Sensors|How to use Bed and Chair Sensors, add rules, view readings, etc.]]
* [[Action Buttons|How to use Action Buttons, add rules, view button history, etc.]]
* [[Action Buttons|How to use Action Buttons, add rules, view button history, etc.]]
* [[Battery Tips for Sensors|Battery Tips for Sensors]]
<br />
<br />


<small>pdf format ([[Media:AddInovonicsDevices.pdf]])</small>
<small>pdf format ([[Media:AddInovonicsDevices.pdf]])</small>

Revision as of 20:30, 6 December 2012

Adding a Device

In order for the device to send readings to the GrandCare system, it must be configured on the system.

  • For motion, door, and bed sensors, open the Activity module
  • For action buttons, open the Notifications module
  • For medication dispensers, open the Medication module
  • Click the "Add New Device" button
  • Enter a Location and Description for the device
  • Select the proper device from the drop-down selection list
  • Click the "Next" button
  • Enter the device Serial Number (found on a sticker on the bottom of the device) - Enter the complete number, including any tiny numbers preceding the full-size numbers
  • Click the "Finish" button
  • Note: Some motion sensors have a setting jumper in them for FIX/VAR mode. If that's the case, set the jumper to FIX. This sets a fixed 180-second check-in time with the antenna. This mode works the best with CoMo software.

Additional Information


pdf format (Media:AddInovonicsDevices.pdf)