Difference between revisions of "Add Inovonics Devices"

From GrandCare Systems
Jump to navigation Jump to search
m (Formatting changes)
m (Formatting changes)
Line 1: Line 1:
<h3 style="display: inline-block; background:#ffffff; font-weight:bold; border-bottom:2px solid #6093cc; text-align:left; color:#000; padding:0.2em 0.4em;">Adding a Device</h3>
<h3 style="display: inline-block; background:#ffffff; font-weight:bold; border-bottom:2px solid #6093cc; text-align:left; color:#000; padding:0.2em 0.4em;"><br>Adding a Device</h3>
In order for the device to send readings to the GrandCare system, it must be configured on the system.
In order for the device to send readings to the GrandCare system, it must be configured on the system.
* [[Logging In|Log in to the Online Care Portal]]
* [[Logging In|Log in to the Online Care Portal]]

Revision as of 15:16, 25 January 2016


Adding a Device

In order for the device to send readings to the GrandCare system, it must be configured on the system.

  • For motion, door, and bed sensors, open the Activity module
  • For action buttons, open the Notifications module
  • For medication dispensers, open the Medication module
  • Click the "Add New Device" button
  • Enter a Location and Description for the device
  • Select the proper device from the drop-down selection list
  • Click the "Next" button
  • Enter the device Serial Number (found on a sticker on the bottom of the device) - Enter the complete number, including any tiny numbers preceding the full-size numbers
  • Click the "Finish" button

Note: Some motion sensors have a setting jumper in them for FIX/VAR mode. If that's the case, set the jumper to FIX. This sets a fixed 180-second check-in time with the antenna, which works best with the system software.

Note: For large installations with substantial distance between the sensor and transceiver, you can boost the signal with a repeater. See the Supported Hardware List for supported models.


Additional Information



PDF Format