Add Inovonics Devices

From GrandCare Systems
Revision as of 20:02, 3 August 2012 by Kristin (talk | contribs)
Jump to navigation Jump to search


About the Devices


Adding a Device

In order for the device to send readings to the GrandCare system, it must be configured on the system.

  • For motion, door, and bed sensors, open the Activity module
  • For action buttons, open the Notifications module
  • For medication dispensers, open the Medication module
  • Click the "Add New Device" button
  • Enter a Location and Description for the device
  • Select the proper device from the drop-down selection list
  • Click the "Next" button
  • Enter the device Serial Number (found on a sticker on the bottom of the device) - Enter the complete number, including any tiny numbers preceding the full-size numbers
  • Click the "Finish" button
  • Note: Some motion sensors have a setting jumper in them for FIX/VAR mode. If that's the case, set the jumper to FIX. This sets a fixed 180-second check-in time with the antenna. This mode works the best with CoMo software.

From the Care Menu, click the subgroup you want to add a device to - for this example - motion


Additional Information