Door Sensor Installation

From GrandCare Systems
Revision as of 19:39, 7 October 2013 by Kristin (talk | contribs) (Removed reference to medication containers - discontinued in Como 4.4.0)
Jump to navigation Jump to search


Door Sensor Installation Tips

These sensors can be tricky to install because the magnet on the sensor needs to line up with the magnet in the contact. Before deploying to a client's home, it's a good idea to apply sticker dots to the contact and to the spot on the sensor that should match up. That way, if the sensor or contact ever needs to be remounted, it will be obvious to the customer which way it goes.

To determine the location of the battery inside the sensor, you may need to open the cover of the sensor and have a look. You should see a little glass tube looking thing. That's the magnetic switch that should be facing the magnet on the door.

The adhesive that comes with the sensor may not hold for more than a year or so. If it's acceptable to the client, use screws, or a higher grade adhesive, such as super glue.