Pressure Mat Setup

From GrandCare Systems
Revision as of 18:08, 21 August 2013 by Kristin (talk | contribs) (Added link to current Supported Hardware List)
Jump to navigation Jump to search


Attaching a Sensor to a Pressure Mat

Door and chair sensors are actually pressure mats attached to contact sensors. The sensors communicate the open and close signals from the mats to the system. It is not usually necessary for you to attach the sensor to the pressure mat, but if it is necessary, or if you need to make a repair, the following video will show you how it is done. (See the Supported Hardware List for the current selection of supported contact sensors.)

<mediaplayer>File:BedSensorAttachment.mp4</mediaplayer> (May take a few moments to load before starting)