X10 Antenna Configuration

From GrandCare Systems
Revision as of 16:31, 3 August 2012 by Kristin (talk | contribs)
Jump to navigation Jump to search
Peripherals Screen
Choose a Port


Overview

There are 2 different models of X10 antenna (transceiver), a serial and a USB model. The serial antenna can be used on any system with a serial port, and can be used with a serial-to-USB adapter on systems without. The serial antenna must be plugged into an electrical outlet. The USB model is more common.

How to Install an X10 Antenna

At the touchscreen (or for a CoMo box - at the GCTV image):

  • Insert the X10 antenna into an available port (typically a port on the back of the machine)
  • If using the serial model, plug the antenna into an electrical outlet
  • Press the System (Gear) button
  • Enter the 4-digit System PIN (which is set, and can be viewed, on the Advanced Settings screen in the Care Menu)
  • Press "Peripherals"
  • Choose the antenna type (Aeon Labs Z-Stick)
  • Choose the port - your choices will be specific to the system hardware
  • Press "Turn On"
  • Restart peripherals when prompted
  • If installed correctly, the row will now be highlighted in green. If there is a problem with the installation, the row will be highlighted in red.
  • After it is installed correctly, you can begin to add Z-Wave devices, such as motion sensors, door sensors, etc.


At the touchscreen (or for a CoMo box - at the GCTV image) Click the System Icon (if needed - default PIN is 1111) Click Peripherals W800 is X10 Choose the port Click “Turn On” Restart peripherals when prompted