Difference between revisions of "Z-Stick Configuration"

From GrandCare Systems
Jump to navigation Jump to search
Line 9: Line 9:
* Press the System (Gear) button
* Press the System (Gear) button
* Press "Peripherals"
* Press "Peripherals"
* Choose the antenna type
* Choose the antenna type (Aeon Labs Z-Stick)
* Choose the port - your choices will be specific to the system hardware
* Choose the port - your choices will be specific to the system hardware
* Press "Turn On"
* Press "Turn On"
* Restart peripherals when prompted
* Restart peripherals when prompted
* If installed correctly, the row will now be highlighted in green. If there is a problem with the installation, the row will be highlighted in red.<br /><br />
* If installed correctly, the row will now be highlighted in green. If there is a problem with the installation, the row will be highlighted in red.<br /><br />

Revision as of 18:32, 1 August 2012

Z-Stick
Peripherals Screen
Choose a Port


Overview

When you are using Z-Wave protocol ADL sensors, you have your choice of two Z-Wave transceivers (antennas), the Z-Stick or the Z-Troller. The Z-Stick is more commonly used, because of its small form factor. It is also easy to use, and less expensive than the Z-Troller. The Z-Stick has a shorter range than the Z-Troller, and is appropriate for demo systems, apartments, and smaller houses.

How to Install a Z-Stick

At the touchscreen (or for a CoMo box - at the GCTV image):

  • Press the System (Gear) button
  • Press "Peripherals"
  • Choose the antenna type (Aeon Labs Z-Stick)
  • Choose the port - your choices will be specific to the system hardware
  • Press "Turn On"
  • Restart peripherals when prompted
  • If installed correctly, the row will now be highlighted in green. If there is a problem with the installation, the row will be highlighted in red.