Difference between revisions of "Z-Stick Configuration"
Jump to navigation
Jump to search
(Created page with "When you are using Z-Wave protocol ADL sensors, you have your choice of two Z-Wave transceivers (antennas), the Z-Stick or the Z-Troller. The Z-Stick is more commonly used, be...") |
Sfeldstein (talk | contribs) |
||
| (23 intermediate revisions by 4 users not shown) | |||
| Line 1: | Line 1: | ||
When you are using Z-Wave protocol ADL sensors, you | [[File:ZStick.png|thumb|right|Z-Stick]] | ||
[[File:PeripheralsScreenForZ-Stick.png|right|frame|Peripherals Screen]] | |||
[[File:Z-WavePorts.png|right|frame|Choose a Port]] | |||
===Overview=== | |||
When you are using Z-Wave protocol ADL sensors, you must first set up the Z-Wave antenna, the Z-Stick.<br /><br /> | |||
===How to Install a Z-Stick=== | |||
At the touchscreen: | |||
* Insert the Z-Stick into an available USB port (typically a port on the back of the machine, ideally a lower port, so that smaller USB devices will be visible above the Z-Stick) | |||
* Press the System (Gear) button | |||
* Enter the 4-digit System PIN (which is set, and can be viewed, on the Advanced Settings screen in the [[Care Menu|Care Menu]]) | |||
* Press "Devices" and then "Antennas." | |||
* Choose the antenna type (Aeon Labs Z-Stick) | |||
* Choose the port - your choices will be specific to the system hardware | |||
* Press "Turn On" | |||
* Restart peripherals when prompted | |||
* If installed correctly, the row will now be highlighted in green. If there is a problem with the installation, the row will be highlighted in red. | |||
* After it is installed correctly, you can begin to [[Add Z-Wave Devices|add Z-Wave devices]], such as motion sensors, door sensors, etc.<br /><br /> | |||
Latest revision as of 21:24, 13 March 2019
Peripherals Screen
Choose a Port
Overview
When you are using Z-Wave protocol ADL sensors, you must first set up the Z-Wave antenna, the Z-Stick.
How to Install a Z-Stick
At the touchscreen:
- Insert the Z-Stick into an available USB port (typically a port on the back of the machine, ideally a lower port, so that smaller USB devices will be visible above the Z-Stick)
- Press the System (Gear) button
- Enter the 4-digit System PIN (which is set, and can be viewed, on the Advanced Settings screen in the Care Menu)
- Press "Devices" and then "Antennas."
- Choose the antenna type (Aeon Labs Z-Stick)
- Choose the port - your choices will be specific to the system hardware
- Press "Turn On"
- Restart peripherals when prompted
- If installed correctly, the row will now be highlighted in green. If there is a problem with the installation, the row will be highlighted in red.
- After it is installed correctly, you can begin to add Z-Wave devices, such as motion sensors, door sensors, etc.