Antenna Installation Tips

Configuration Errors

Error messages are sent to the account's distributor (whichever email is on the account's distributor in GCManage) to let you know if there are problems with the configuration of the antennas on the system.

Possible causes for error notices:

• Peripheral is turned on, but unplugged
• Peripheral is turned on, but plugged into the wrong port
• Peripheral is turned on, but does not exist and should be turned off
  
  

Fixing the Errors

To fix the problem, at the system (or in the [emulation], which you reach from the Touchscreen module in the Care Menu:

• Press the Gear icon
• Press Peripherals

Is the row highlighted in green? Then it should be fine. Is the device plugged in?

If yes, then verify that it's plugged into the correct port.

If no, then turn off the device.

For more information about particular protocol types, see: [Setup]

Names

• EN4000 = Inovonics
• W800 = X10